Skip to main content

Platebit

INSTALLATION GUIDE • 3 SIMPLE STEPS

How to install the Platebit APK

Installing takes a few seconds.

1
Download the APK file
Tap "Download APK". If your browser displays a warning about downloading an APK file, select "Download anyway". It is Android's standard prompt for apps outside the Play Store.
2
Open & Allow from this source
Once downloaded, tap "Open". If prompted for permission, tap "Settings" and turn on "Allow from this source".
3
Tap "Install"
Tap "Install" and you are all set! Open Platebit and get started for free.
Article · 4 min read

How to Put Platebit on Your Wear OS Watch: A Step-by-Step Guide

How to install the Platebit app on your Wear OS watch: from a computer with adb or from your phone, how to update, and the new app from version 1.68.

Platebit also has an app for Wear OS watches. You log your sets from your wrist, see your rest, walking and breathing with vibration cues, and everything is saved on your phone. The watch app isn’t on Google Play yet, so you install it yourselfusing one of the two methods below. It takes about 10 minutes the first time and 1 minute for each update.

What you need

  • A watch with Wear OS 3 or newer (e.g. Galaxy Watch 4 and later, Pixel Watch, newer Wear OS watches).
  • Platebit on your phone, in the same version as the watch file.
  • Watch and computer (or phone) on the same Wi‑Fi.
  • Either a computer (Windows, Mac or Linux) or an installer app on your phone, such as “Wear Installer 2”.

Step 1: Turn on Developer options on the watch

  1. On the watch, go to Settings → System → About (on some watches: About watch → Software information).
  2. Tap “Build number” 7 times until you see “You are now a developer”.
  3. Go back to Settings, open Developer options and turn on “ADB debugging” and “Wireless debugging”.

Step 2: Download the watch file

Open the Platebit releases on GitHub. In the latest release, open Assets and download Platebit-Wear-<version>.apk (e.g. Platebit-Wear-1.68.0.apk). Only ever download it from there.

Step 3a: Install from a computer

  1. Download Google’s SDK Platform-Tools for your system and unzip them, e.g. to C:\platform-tools. That’s where adb lives.
  2. On the watch, inside “Wireless debugging”, tap “Pair new device”. You’ll see an address with a port (e.g. 192.168.1.50:37123) and a 6-digit code.
  3. Open PowerShell (Windows) or Terminal (Mac/Linux) in the adb folder and pair. When asked, type the code shown on the watch:
cd C:\platform-tools
.\adb pair 192.168.1.50:37123
  1. Then connect to the address and port shown on the main “Wireless debugging” screen (it’s a different port from the pairing one) and check that the watch is listed as device:
.\adb connect 192.168.1.50:41234
.\adb devices
  1. Install the file. You should see Success:
.\adb install "$env:USERPROFILE\Downloads\Platebit-Wear-1.68.0.apk"

On Mac or Linux, type ./adb instead of .\adb and use your file path, e.g. ~/Downloads/Platebit-Wear-1.68.0.apk. Pairing (adb pair) is only needed the first time.

Step 3b: Install without a computer

  1. On your phone, install an app such as “Wear Installer 2” from Google Play.
  2. Do Step 1 on the watch and open “Pair new device”.
  3. In the app, enter the address, port and code shown on the watch, pick the Platebit-Wear-…apk you downloaded to your phone and tap install.

Step 4: Open it and connect it

Open Platebit on the watch with your phone nearby (Bluetooth). They connect on their own. On the phone, in Settings, you’ll see that there’s a watch with Platebit. When you’re done, turn off “Wireless debugging” on the watch, because it drains the battery.

Updating to a new version

Whenever you update Platebit on your phone and the release says the watch needs it too, download the new file, connect and install with -r, which keeps everything already on the watch:

.\adb connect 192.168.1.50:41234
.\adb install -r "$env:USERPROFILE\Downloads\Platebit-Wear-1.68.0.apk"

From version 1.68: the new app

From 1.68, Platebit is a separate app on both the phone and the watch. The new Platebit on the phone only connects to the new Platebit on the watch. First move your data to the new Platebit on your phone, then install the new app on the watch and remove the old one (your data is on the phone, so nothing is lost):

.\adb install "$env:USERPROFILE\Downloads\Platebit-Wear-1.68.0.apk"
.\adb uninstall app.morsel
.\adb shell pm list packages | findstr platebit

The last command should show package:app.platebit. On Mac/Linux, use grep instead of findstr.

If something goes wrong

  • “failed to connect”: the port changes every time you turn on wireless debugging. Check the port on the watch again. If it still fails, run adb pair again.
  • “INSTALL_FAILED_UPDATE_INCOMPATIBLE”: the watch already has an app with the same name and a different signature. Remove it with adb uninstall app.platebit (or app.morsel for the old one) and install again.
  • “INSTALL_FAILED_VERSION_DOWNGRADE”: the watch has a newer version than the file. Download the file for the version you have on your phone.
  • The watch can’t see the phone: check that the phone and watch have the same version and that both are the new Platebit (from 1.68). Open Platebit on both, with Bluetooth on.
  • The battery drains quickly: turn off “Wireless debugging” you’re done.

Want to try Platebit?

Download the free beta straight to your phone. No card, no commitment, no ads.

Works with Android 12.0+ & Health Connect

Leave a Reply

Your email address will not be published. Required fields are marked *